First, you have to consider what industry you are in and how thick the product needs to be cut. Generally speaking, laser cutting is suitable for carbon steel below 12mm and stainless steel below 6mm, and is used in the automotive, sheet metal, coiling and cutting industries.

 

However, the cutting thickness of the laser cutting machine is limited, so it must be reserved! For example, the maximum cutting thickness of a laser cutting machine is 16mm, which means that this laser cutting machine can cut up to 16mm, but if the laser cutting machine cuts 16mm for a long time, the service life of the machine will be damaged. There is a difference between the maximum cutting thickness of the laser cutting machine and the conventional cutting thickness.

 

Secondly, the format should be considered. The mainstream cutting format on the market is 3015 (3m*1.5m). The cutting format of the laser cutting machine is generally customized by the manufacturer according to customer needs.

 

Third, burr control is also very important, which is also what customers care about most. Generally speaking, materials cut by laser cutting machines will have burrs, which mainly depends on the cutting thickness of the laser cutting machine and the gas used. Materials with a thickness of less than 4mm generally have no burrs. As for the choice of gas, nitrogen is the best, oxygen is the second, and air is the worst. Metal laser cutting works best on thin plates. Of course, with the popularity of high-power laser cutting machines, the continuous development and improvement of equipment, it is now also doing well in thick plate cutting.

 

 

 

1. Laser

 

2. Engraving head

 

3. Operating system

 

4. Refrigerator

The refrigerator achieves the cooling effect through steam compression or absorption cycle. There are many brands of chillers. Good brands can achieve long-term stable cooling effect, allowing high-load laser cutting machines to operate within a stable temperature range.